Final Integeration
Well everything is all set to integerate into one thing
For that i have devided the integeration in 2 parts
1. The air filter part
2. The electronicbox part
Air filter part
This is the timelapse Video showing the whole assembly
Electronics box
![](img/Final Project/150.jpg )
This image shows you the unwirred assembly of the whole project , i have did this to confirm my design
As you can see that all components are very easily placed which confirms my design
![](img/Final Project/151.jpg )
This image shows you the wired part
This image shows you overview
![](img/Final Project/153.jpg )
As well as i have connected an external jack point so i can add adaptor from inside
![](img/Final Project/154.jpg )
The part which i made for the pcb works well as , i have used the jst connector , so i was forced to connect the wired from down
![](img/Final Project/155.jpg )
This is the best wire management i can possibly do
![](img/Final Project/157.jpg )
Connected the 4 wires from screen to board , which include VCC , GND , RX-TX
This video shows the final working of my project